Plaque pour Power Block Plug’N’Play

Choose your finish plate from the list below.

If you are still unsure about which version to choose, visit our SITE to find the additional information you need.

We advise you to check the dimensions against the plate drawings.

PL01 - Standard plate (Plaque standard):
Replaces battery boxes:
- Gotoh BB-04, IBANEZ 4PT1JBB1 or Fred's Guitar Part ELBB4 => No luthier's modifications are required.
- BB-02 or Fred's Guitar Part ELBB2 => You need to add 4 screw holes.*
The most common battery box.
To match your instrument's original voltage, we recommend a 9V Plug'n'Play Power Block.

PL02 - Oval plate (Plaque ovale):
Replaces battery boxes:
- Boston BH-2100 or Fred's Guitar Part ELBB5 => No luthier's modifications required.
Found on some Yamaha models.
To match your instrument's original voltage, we recommend a 9V Power Block Plug'n'Play.

PL03 - Wide plate (Plaque Large):
Wide plate to cover less standard battery boxes (e.g. Boston BH-2200) => You need to add 4 screw holes.*
To be used with its 2mm extension - RH03 (Rehausse pour plaque large) - for holes less than 24mm deep (e.g. Fred's Guitar Part ELBB1, Belcat BH-200).
To match your instrument's original voltage, we recommend a 9V Power Block Plug'n Play.

PL04 - Oval-mini plate (Plaque ovale-mini):
Replaces the battery cover on some Ibanez or Cort guitars. For these applications, where the engraving is adjusted to the 9V battery and its PP3 connector, it is necessary to integrate an OEM version of the Power Block Plug'n'Play. In this case, no luthiery modification is required.
To match your instrument's original voltage, we recommend a 9V Power Block Plug'n'Play.

PL06 - Sirdoo plate (Plaque Sirdoo):
Replaces the battery doors on most Sire Marcus Miller instruments (except Generation 1, which are fitted with BB-4W battery boxes and are compatible with our PL07 double plates).
To be used with its 2mm extension - RH06 (Rehausse pour plaque Sirdoo) - to match the thickness of the original plate. => No luthier's modifications required.
To match the original voltage of your instrument, we recommend an 18V Plug'n'Play Power Block.

PL07 - Double plate (Plaque double):
Replaces battery boxes:
- Gotoh BB-04W, or Fred's Guitar Part ELBB4W => No luthier's modifications required.
The most common double-battery battery box.
To match your instrument's original voltage, we recommend an 18V Power Block Plug'n'Play.

PL08 - Long plate (Plaque longue):
Replaces battery boxes:
- Musiclily MX1582 => No luthier's modifications required.
To match your instrument's original voltage, we recommend a 9V Power Block Plug'n'Play.

PL09 - Fendoo plate (Plaque Fendoo):
Replaces the battery doors on some Fenders. There are no luthiery modifications to be made.
To match your instrument's original voltage, we recommend an 18V Power Block Plug'n'Play.

PL10 - Musicdoo plate (Plaque Musicdoo):
Replaces the battery boxes on some Musicmans (the others are equipped with Gotoh BB-04 and are compatible with our standard PL01 plates). There are no lutherie modifications to be made.
To match your instrument's original voltage, we recommend a Plug'n'Play 9V Power Block.

* To add the screws, it is necessary to pre-drill the holes to a diameter of 2mm (to avoid the risk of screw breakage).