Sélecteurs et splitters micros

Pickup selectors allow you to choose a single pickup or a combination of pickups from among those available.
Splitters allow you to select one or more windings, associated in series or parallel with one of the pickups.

However, the same switch can act as both selector and splitter.
You can specify your requirements by e-mail if you have a particular request.
Or ask me to supply a push-push or push-pull version of one of the potentiometers, which you can wire yourself.

Otherwise, you'll find here the splitter selectors commonly requested:
- S014 - 3-position toggle selector: up for mic 1 / down for mic 2 / center for both mics at the same time (in parallel).
- S010 - "Metal-style" selector 4 positions for 3 pickups: bridge pickup only / bridge in series with center pickup / bridge and neck pickup in parallel / neck pickup only (recommended drilling 9mm and provide a potentiometer knob with an internal diameter of 6mm)

An alternative, usually found on 2-pickup basses: the balance potentiometer, which lets you adjust the levels of each pickup.